This chapter contains information on the following subjects:
→ Running-in
→ Accessories and parts
→ Service fluids and consumables
→ Repairs and technical modifications
→ Repairs and faults in the airbag system
→ Retrofitting two-way radios
→ Information stored in the control units
→ Using a mobile telephone in the vehicle without a connection to the external
aerial
→ Vehicle lifting points
Additional information and warnings:

WARNING
Running-inSiemens Wheel Electronics Tire Pressure Monitoring Sensor, Removing and
Installing
WARNING
If tire sealant was used, then the wheel electronics
on that particular wheel must be replaced.
The Siemens wheel electronics does not have a
microencapsulated ...
Wheel, Balancing, Tire and Wheel Radial and Lateral Run-Out, Checking
Before beginning balancing, the following requirements must
be fulfilled.
The tire pressure must be OK.
The tire profile must not be worn on one side. The tire
profile must be at least 4 mm.
...
Manual gearbox: selecting a gear
Fig. 110 Gear shift pattern of a 5 or 6-speed
manual gearbox
First read and observe the introductory information
and safety warnings The positions of the individual driving
gears are shown on the gearshift lever .
Fully depress and hold the clutch pedal.
Move the gear lever t ...