Volkswagen Polo Owners Manual: Information on steering
First read and observe the introductory information
and safety warnings
The steering should be locked every time you leave the vehicle to make it more difficult for the vehicle to be stolen.
Mechanical steering column lock
| Activating the steering lock | Deactivating the steering lock |
|---|---|
| Park the vehicle . | Turn the steering wheel slightly to take the load off the steering lock mechanism. |
| Remove the vehicle key. | Insert the vehicle key into the ignition lock. |
| Turn the steering wheel slightly until the steering lock clicks into place. | Hold the steering wheel in this position and turn the ignition on. |
Electro-hydraulic steering
With the electro-hydraulic steering system, the steering assistance is automatically matched to vehicle speed and the steering wheel angle. The electro-hydraulic steering functions only when the engine is running.
You will need considerably more strength than normal to steer the vehicle if the power steering is reduced or has failed completely.
Warning and indicator lamps
First read and observe the introductory information
and safety warnings Depending ont eh vehicle equipment scope,
an electrohydraulic or an electromechanic steering system may be fitted.
...
Other materials:
Cigarette Lighter Illumination Bulb -L28-, Removing and Installing
Note
On some vehicle equipment levels, socket illumination is via
Light Emitting Diode (LED) instead of a bulb. These LEDs are
integrated with the illumination housing and cannot be serviced
or replaced separately.
...
Changing bulbs in the front headlights (halogen H7)
Fig. 180 Rear view of the
right-hand H7 front headlight: dipped beam ①, turn signal ②, and main beam and
side light ③
First read and observe the introductory
information and safety warnings
The actions should only be carried out in the speci ...
7-Pin« Trailer Socket
If more electrical consumers need to be connected than the
»7-pin« socket allows, a second
»7-pin« socket must be installed.
Pin assignment must conform to DIN ISO 1724:
1 - Left turn signal
2 - Tail ...
