Volkswagen Polo Owners Manual: Braking, stopping and parking
- Introduction
- Warning and indicator lamps
- Handbrake
- Parking
- Information on the brakes
- Brake support systems
- Switching the TCS on and off
- Brake fluid
Gear-change indicator
First read and observe the introductory information
and safety warnings In some vehicles, the instrument cluster
will show which gear should be selected while the vehicle is in motion to reduce ...
Introduction
This chapter contains information on the following subjects:
→ Warning and indicator lamps
→ Handbrake
→ Parking
→ Information on the brakes
&n ...
Other materials:
Crimping Pliers with Insert
The Crimping Pliers without Insert -VAS1978/1- with Crimping
Pliers - Insert 2 -VAS1978/2- is a component of the Wiring
Harness Repair Set -VAS1978- and is used to crimp the connector
during the wiring harness repair.
...
Towing Recognition Control Module -J345
General Information
The Towing Recognition Control Module -J345- recognizes
“trailer mode” when there is a power decrease of at least 5 W
→ Note and transmits this information to various control
modules via the CAN data bu ...
Threaded Connections, Repairing
Special tools and workshop equipment
required
Torque Wrench 1331 5-50Nm -VAG1331-
Note
Do not use rust remover, contact spray or grease because the
lack of friction will cause the torque to be ...
