VW Polo manuals

Volkswagen Polo Service & Repair Manual: Wiring Harness Repair Set -VAS1978A

The new Wiring Harness Repair Set -VAS1978A- makes optimal repair quality possible in the realm of vehicle electronics. Using the new pliers, repairs affecting harness connectors and for breaks in wiring can be performed. For this purpose, complete repair wires with terminals already crimped on are used and can be connected to vehicle-specific wiring harness by the use of the four different types of crimp connections. A pair of new crimping pliers with crimping heads and a hot air gun for shrinking the crimp connections provide trouble-free electrical connection.
  Note
Additional information:
Refer to Wiring Harness Repair Set -VAS1978A- Operating Instructions.
 

Wiring Harness Repair Set -VAS1978A

Upgrade Kit For VAS1978 -VAS1978/50
The Upgrade Kit For VAS1978 -VAS1978/50- is required in order to bring the “old”Wiring Harness Repair Set -VAS1978- up to the new standard of the Wiring Harness R ...

Release Tool Set -VAS1978/35
The Release Tool Set -VAS1978/35- is used to release the various primary and secondary locking mechanisms on VW-group vehicles. The set consists of 26 different tools ...

Other materials:

Introduction
This chapter contains information on the following subjects:  → Locking or unlocking the driver door manually  → Locking the front passenger door and rear doors manually  → Unlocking the tailgate manually  → Unlocking the selector lever lock manually If the vehic ...

Receiver/Dryer
  Caution Non-approved tools or materials such as leak sealing additives can cause damage or malfunctions in the system. Only use tools and materials approved by the manufactu ...

4-Pin Heated Oxygen Sensor (HO2S), Removing and Installing
  Note Do not repair the heated oxygen sensor wires. Repairing may result in malfunctions. Use the faulty sensor as a guide for installing all of the accompanying attachments, cable ties or marking bands. ...

© 2016-2024 Copyright www.vwpolo.net