Volkswagen Polo Service & Repair Manual: Wiring
- Vehicle Diagnosis, Testing and Information Systems
- Vehicle Diagnostic Tester, Connecting
- Vehicle Diagnostic Tester, Connecting, Golf MY 1998 through 2003
- Wiring Harness and Connector Repairs
- Vehicle Electrical System, General Repair Information
- Wiring Harness Repair Set
- Tool Descriptions
- Wiring Harnesses, Repairing
- Fiber-Optic Cables, Repairing
- Antenna Wires, Repairing
- Contact Housings and Connectors, Repairing
- Contact Housings, Releasing and Disassembling
- Contact Surface Cleaning Set -VAS6410
- Wiring Eyelets, Repairing
- Threaded Connections, Repairing
- Battery Terminal Clamp and Battery Terminal, Cleaning
- Protecting
- Heated Oxygen Sensor, Replacing
Cigarette Lighter Illumination Bulb -L28-, Removing and Installing
Note
On some vehicle equipment levels, socket illumination is via
Light Emitting Diode (LED) instead of a bulb. These LEDs are
integrated with th ...
Other materials:
Explanation of Test Results
1 -
Type of test.
2 -
Battery test result.
3 -
Measured voltage
4 -
Measured cold start value.
5 -
Cold st ...
Vibration, Vibration Control System
Expanded functions can be performed using Hunter RFT33VAG
Road Force Touch™ Wheel Balancer -VAS6230B4- in addition to the
previously known balancers.
A special characteristic of this system is testing the
radial force of wheel/tire dur ...
Information on the brakes
First read and observe the introductory information
and safety warnings New brake pads cannot generate
the full braking effect during the first 200 to 300 km and must first be run in
. However, you can compensate for the slightly reduced braking force
by applying more pressure to the bra ...
