VW Polo manuals

Volkswagen Polo Service & Repair Manual: Windshield and Rear Window Washer System

The following hose connection types are used for connecting hoses to pumps and spray nozzles or as separating points
   
–  To loosen the connection, pulling both halves of the coupling apart.
–  To secure the connection, push both halves of coupling together until felt and heard to engage.
 

Windshield and Rear Window Washer System

–  To loosen the connection, turn the securing clip -1- 90° -arrow- and then pull the hose connection off.
–  To secure the connection, attach the hose connection and turn the securing clip -1--arrow- until it engages.
 

Windshield and Rear Window Washer System

–  To loosen the connection, lift the securing clip -1- approximately 1 mm -arrow- and then remove the hose connection.
–  To secure the connection, attach the hose connection and press in the securing clip -1- until it engages.
–  To secure the connection, attach the hose connection and press in the securing clip -1- until it engages.
 

Windshield and Rear Window Washer System

–  To loosen the connection, pull the securing clip upward -1--arrow- and remove the hose connection.
–  To secure the connection, attach the hose connection and press in the securing clip -1- until it engages.
 

Windshield and Rear Window Washer System

Washer Fluid Line Hose Connections
...

Headlamp Washer System
The following hose connection types are used for connecting hoses to pumps and spray nozzles or as separating points     ...

Other materials:

Run-Flat System PAX, Support Ring
Dimensions     Overview of the most important dimensions: Names Example: 90-500(35) CLI A 1 876107 90 -  Designated width in millimeter ...

Petrol
First read and observe the introductory information and safety warnings Petrol types Vehicles with a petrol engine must be run on unleaded petrol in compliance with the European standard EN 228  . Fuels with a maximum ethanol content of 10% (E10) can be used for refuelling. Petrol types ...

Heel and Toe Wear
Heel-and-toe wear is step-like wear of individual tread blocks, due to which an increased rolling noise can develop. The heel-and-toe wear is caused by the uneven distortion of the tread blocks in the contact patch. Heel-and-toe wear appears in more extr ...

© 2016-2026 Copyright www.vwpolo.net