First read and observe the introductory information and safety warnings
Windscreen wiper response in various situations: | |
---|---|
When the vehicle is stationary. | When switched on, the wipers will temporarily be switched to the next setting down. |
While the wash and wipe system is running. | The Climatronic will switch to air recirculation mode for approximately 30 seconds to prevent the smell of the windscreen washer fluid from entering the vehicle interior. |
When the interval wipe is switched on. | The wiper intervals vary according to the vehicle speed. The faster the vehicle is travelling, the shorter the interval. |
Heated washer jets
The heating only defrosts frozen washer jets. It does not heat the hoses that the water flows through. The heated washer jets control their heat output automatically when the ignition is switched on. The heating level depends on the ambient temperature.
Headlight washer system
The headlight washer system cleans the lenses on the headlights.
Once the ignition and the dipped beam headlights have been switched on, the headlights will be washed the first time the windscreen washer system is used, and every fifth time thereafter. To do this, pull the windscreen wiper lever towards the steering wheel when the dipped beam headlights or main beam are switched on. Clean off stubborn dirt (insects, etc.) from the headlights at regular intervals, for instance when filling the tank.
In winter, you should remove any snow from the headlight washer nozzles in the bumper to keep the headlight washer system in working order. Remove any ice with a de-icer spray.
The wiper will try to wipe away any obstacles that are on the windscreen. The wiper will stop moving if the obstacle blocks its path. Remove the obstacle and switch the wiper back on again.
Preserving Wax
Definition:
Preserving Wax -AKR 321 M15 4-
Preserving Wax -AKR 321 M16 10-
Edition 04/2009
Product Description
Preserving Wax -AKR 321 M15 4- and Prese ...
Front airbags
Fig. 56 Location and deployment zone of
the driver front airbag
Fig. 57 Location and deployment zone of
the front passenger front airbag
First read and observe the introductory information
and safety warnings
In conjunction with the seat belts, the front airbag system gives the front occu ...
Changing a blown fuse
Fig. 174 A blown fuse
Fig. 175 Removing or fitting a
fuse using the plastic pliers ①
First read and observe the introductory
information and safety warnings
Preparation
Switch off the ignition, the lights and all electrical consumers.
Open the appropriate fuse box .
Detecti ...