Volkswagen Polo Owners Manual: Wheels and tyres
- Introduction
- Handling wheels and tyres
- Rims
- New wheels and tyres
- Tyre pressure
- Tread depth and wear indicators
- Tyre damage
- Spare wheel or temporary spare wheel
- Tyre lettering
- Winter tyres
- Snow chains
Cleaning seat belts
First read and observe the introductory information
and safety warningsLarge particles of dirt on the automatic belt prevent
it from rolling back properly and thus from working effectively.
The ...
Introduction
This chapter contains information on the following subjects:
→ Handling wheels and tyres
→ Rims
→ New wheels and tyres
→ Tyre pressure
→ Tread depth an ...
Other materials:
Flushing Not Necessary
Note
For vehicles with an electrically-driven A/C compressor,
de-energize the high voltage system before removing the A/C
compressor. Refer to
→ Electrical System Hybrid; Rep. Gr.93.
–
Dischar ...
Fender Corrosion Repair Measures, in Wheel Housing Liner Contact Area
Note
The corrosion protection in the fender seam must be applied on all
replacement parts, on which the attached seal is not already present.
The additional corrosion protection seal will prevent “chafe marks”
in the fender wheel housing liner.
...
Welding and Soldering on Refrigeration Systems
Before performing welding or soldering work on vehicles near
the air conditioning system components, extract the refrigerant
and remove the residue by flushing with compressed air and
nitrogen.
The products of refrigerant decomposition d ...
