Volkswagen Polo Service & Repair Manual: Wheel Bolts, Anti-Theft Wheel Bolt
| 1 - |
Anti-theft wheel bolts |
|
|
|
Wheel Bolts, Master Sets for Anti-Theft Wheel Bolts
| Special tools and workshop equipment
required |
| Torque Wrench 1332 40-200Nm -VAG1332- |
| Wheel Bolt Master Socket Set -T10101- |
| Wheel Bolt Master Socket Set -T10101A- |
| Wheel Bolt Master Socket Set -T40004- |
| Wheel Bolt Master Socket Set -T40073- |
|
Shank Designs
There are two shank designs: rounded and conical.
The rounded shank has a curv ...
Snow Chins, Assembly and Replacing
Snow chains may be mounted only on the drive wheels.
If the vehicle has AWD, then snow chains may be used on the
...
Other materials:
Magnetic Clutch High Pressure Switch -F118
Note
For switching pressures, removing and installing switches
and switch arrangement and version, see vehicle-specific
refrigerant circuit.
Refer to
→ Rep. Gr.87.
...
ACC - Adaptive Cruise Control
Note
On vehicles with ACC, the trim in the right cover section of
the front bumper must not be painted if paint repairs or
component replacements are performed. The ACC system is located
behind this section therefore a coat of paint would ...
Single Wire Seals, Installing
Note
Single wire seals prevent the penetration of water and dirt
into the contact housing. They are installed, for example, in
the engine compartment and must be reinstalled after a repair.
Single wire seal is crimpe ...
© 2016-2026 Copyright www.vwpolo.net
