Volkswagen Polo Service & Repair Manual: Wheel Balancing, Rim Radial and Lateral Run-Out, Checking
Mount the rim on the Balancing Machine. |
– |
Use the Wheel Centering System Adapter -VAS5271-. |
– |
Preload the Tire Dial Gauge approximately 2 mm. |
|
|
|
– |
Note the smallest and the largest dial readings. |
– |
Compare determined value with specifications in the table.
Refer to
→ Anchor. |
Note
Peak values on the Tire Dial Gauge due to small
irregularities may be disregarded. |
|
|
|
Specified Values for Radial and Lateral
Run-Out on the Rim |
Rim |
Radial
Run-Out (mm) |
Lateral
Run-Out (mm) |
Steel wheel |
0.5 |
0.5 |
Light alloy wheel |
0.5 |
0.8 |
Note
If the measured value exceeds the specified value, no acceptable
smooth running can be attained. |
Before beginning balancing, the following requirements must
be fulfilled.
The tire pressure must be OK.
The tire p ...
Other materials:
Overview - Rim
1 -
Rim Flange
Stop for the side tire bead
2 -
Hump (H2) on Both Bead Seats
Prevents the tire from slipping off the bead seat when driving
around tight curves
An extended hump (EH2) is requir ...
Other stowage compartments
Fig. 101 In the roof: coat hooks
First read and observe the introductory information
and safety warnings
Coat hooks in the roof
Coat hooks are located on the central door pillar and on the rear grab handles
in the roof (arrows).
Other stowage areas:
In the rear door trims.
In the ...
Battery, Charging
Requirements
WARNING
Batteries that have a light yellow visual indicator
do not have to be tested or charged. Jump starting must
not be used!
There is a risk ...
© 2016-2024 Copyright www.vwpolo.net