Stone Chip Protection -AKR 311 KD1 10
Wax Underbody Protection -D 316 D38 A2-Wheel, Balancing on Stationary Balancing Machine
Before beginning balancing, the following requirements must
be fulfilled.
The tire pressure must be OK.
The tire profile must not be worn on one side. The tire
profile must be at least 4 mm.
...
Round Connector Systems
Note
If necessary, housing securing mechanisms (secondary locks)
must be released or removed using specified tool before
releasing the contacts. Refer to
→ Chapter „Secondary Lock“.
...
Ignition lock
Fig. 107 Positions of the vehicle key in
the ignition lock
First read and observe the introductory information
and safety warnings The steering lock can be activated when
there is no vehicle key in the ignition lock.
Vehicle key positions
Ignition switched off. The vehicle key ca ...