AGM Battery
Battery Safety PrecautionsDiagonal Washouts
Diagonal wear spots on tires
Diagonal wear spots run at an angle of approximately 45°
with respect to the plane of circumference.
They usually occur once, but may also occur several times
along the tire circumference.
...
Checklist
Never carry out any work on the engine or in the engine compartment
if you are not familiar with the requisite procedures and general safety requirements,
or if you only have access to incorrect operating equipment, service fluids,
and unsuitable tools . The work should be carried ou ...
Tread depth and wear indicators
Fig. 147 Tyre tread: wear indicators
First read and observe the introductory information
and safety warningsTread depth
Difficult driving situations demand the deepest possible tread depth for the
tyres and the same tread depth for the tyres on the front and rear axles. This applies
in pa ...