Volkswagen Polo Service & Repair Manual
- General Paint Information
- Towing Guide
- Whels, Tires, Whel Alignment
- Specifications for Retrofitting Wheel and Tire Combinations (Documents)
- Handling Problems
- Tires, Evaluating
- Tire Wear
- Component Overview
- Tires, Mounting
- Wheel, Mounting
- Tire Information
- Rim Information
- Tire Pressure Sensor
- Tire Sealant
- Wheel Bolts
- Snow Chains
- Emergency Wheels
- Special Tools
- Battery, Starter, Generator, Cruise Control
- Windshield Wiper/ Washer System
- Exterior Lights, Switches
- Interior Lights, Switches
- Wiring
- Vehicle Diagnosis, Testing and Information Systems
- Wiring Harness and Connector Repairs
- Contact Surface Cleaning Set -VAS6410
- Heated Oxygen Sensor, Replacing
- Refrrigerant R134a Servicing
- A/C System, General Information
- Refrigerant Circuit General Information
- Laws and Regulations
- Refrigerant Circuit
- A/C Service Station, Working with
- Refrigerant Circuit, Detecting Leaks
- Refrigerant Circuit, Removing Contaminants
- Concerns
- Connecting Service Station
- Pressures, Checking
- Components, Replacing
- Special Tools
Driving tips when towing
First read and observe the introductory
information and safety warnings
Towing requires some experience, especially when using a tow rope. Both
drivers should be familiar with the technique requi ...
Other materials:
Adapter for Assembling Flushing Circuit
The following table lists the different adapters necessary
to connect the service station to the refrigerant circuit, to
flush and to bypass the removed receiver/dryer or reservoir and
expansion valve (depending on the vehicle).
Us ...
Support Mode with Battery Charger -VAS5900
General Information
The support mode provides the vehicle electrical system with
voltage when the battery is removed or disconnected.
For more information. Refer to Battery Charger -VAS5900-
Operating Instructions.
...
A/C Compressor with A/C clutch
Caution
Non-approved tools or materials such as leak sealing
additives can cause damage or malfunctions in the
system.
Only use tools and materials approved by the
manufactu ...
