Volkswagen Polo Service & Repair Manual: Vehicle Pulls to One Side

Wear Spots

Wear spots are caused by a hard stop with locked wheels whereby the rubber compound is abraded from the contact patch. When the tires slide across th ...

General Information

Perform a road test to determine if a vehicle pulls to one side and if so, when and to which side. If the vehicle pulls to one side. Refer to → Chapt ...

Other materials:

Release Tool Set -VAS1978/35
The Release Tool Set -VAS1978/35- is used to release the various primary and secondary locking mechanisms on VW-group vehicles. The set consists of 26 different tools which can be used to professionally release or assemble e.g. round connector systems, f ...

Flushing Circuit Block Diagrams
  Note The arrows in the following illustrations show the direction of refrigerant flow while flushing. During flushing, refrigerant flows in the opposite direction than during A/C system operation, therefore the high pressure side of A/C se ...

Correct sitting position
Fig. 35 There must be a distance Ⓐ of at least 25 cm between the driver and the steering wheel. Fig. 36 Correct seat belt routing and head restraint adjustment First read and observe the introductory information and safety warnings The following details the correct sitting positions for ...