Volkswagen Polo Service & Repair Manual: Vehicle Diagnostic Tester, Connecting, Golf MY 1998 through 2003
– |
In vehicles with automatic transmission, move the selector
lever to the “P” or “N” position. |
– |
In vehicles with manual transmissions, move the shift lever
to the neutral position. |
– |
Remove trim -1- in direction of
-arrow-. |
|
|
|
– |
With the ignition switched off, connect the Vehicle
Diagnostic Tester with the Diagnostic Cable to the diagnostic
connection -arrow- in the vehicle. |
– |
Turn off all electrical consumers. |
Note
The connection of all other and the following diagnostic
operation system or vehicle diagnosis and service system occurs
in the previously described sequence. |
|
|
|
Special tools and workshop equipment
required
Vehicle Diagnostic Tester
Vehicle Diagnosis System - Diagnostic Cabl ...
Other materials:
Adjusting the steering wheel position
Fig. 41 Adjusting the steering wheel position
mechanically
First read and observe the introductory information
and safety warnings
Adjust the steering wheel position before setting off and only when the vehicle
is stationary.
Push down the lever .
Adjust the steering wheel so th ...
Cleaning and changing windscreen wiper blades
Fig. 142 Variants A and B: Changing the
windscreen wiper blades. Variants B and C: Changing the rear window wiper blade
First read and observe the introductory information
and safety warningsThe factory-fitted windscreen/window wiper blades are
coated with graphite. The graphite coating ens ...
Two-Part HS Optimum Clear Coat
Definition:
Two-Part HS Optimum Clear Coat -LZK 769 K02 A5-
Edition 10/2012
Product Description
Two-part HS optimum clear coat is a VOC compliant (VOC value
less than 420 g/L ...
© 2016-2024 Copyright www.vwpolo.net