Decorative Trims, Replacing, Bolted Decorative Trims
Valve, Removing and Installing, Valve ExplanationsAdhesive Surface Pretreatment when Replacing Laser-Soldered Roofs
Dry sand the cataphoretic primer on the roof adhesive surface
-item 6-
→ Item down to the bare metal using P180 sandpaper.
–
Dry sand the roof pillar adhesive surface
...
Introduction
This chapter contains information on the following subjects:
→ Technical requirements
→ Fitting the removable ball coupling
→ Removing the ball coupling
→ Hitching and connecting the trailer
→ Loading the trailer
→ Towing a trailer
...
Wiring Harness Repair Set - Hot Air Blower -VAS1978/14A
Caution
When heat-shrinking crimp connections, be careful
not to damage any other wiring, plastic parts or
insulating material with the hot nozzle of the hot air
gun.
Always ...