First read and observe the introductory information
and safety warnings
The vehicle has been manufactured specifically for a particular country and complies with the registration regulations that applied in that country at the time of vehicle production.
If the vehicle is to be sold in another country or used in another country for an extended period, the legal requirements applicable in that country must be observed.
In some cases, certain equipment will have to be fitted or removed and functions deactivated. The scope and type of service available may also be affected. This is particularly important if the vehicle is driven in another climate for a long period of time.
Because different frequency bands are used in different countries, the factory-fitted radio or navigation system may not work in other countries.

NOTICE
Information stickers and plates
Radio reception and aerialsTire Pressure Sensor and Metal Valve, Removing and Installing
Special tools and workshop equipment
required
Torque Wrench 1410 -VAG1410- and Torque Wrench 1331 5-50Nm
-VAG1331-
–
Place metal valve with rubber seal through rim from inside.
...
Battery, Charging with Battery Charger -VAS5906
WARNING
Risk of injury. Follow all Warnings and Safety
Precautions. Refer to
→ Chapter „Warnings and Safety Precautions“.
WARNING ...
Vibration, Vibration Control System
Expanded functions can be performed using Hunter RFT33VAG
Road Force Touch™ Wheel Balancer -VAS6230B4- in addition to the
previously known balancers.
A special characteristic of this system is testing the
radial force of wheel/tire dur ...