Volkswagen Polo Owners Manual: Using the menus in the instrument cluster
Fig. 13 Vehicles without multifunction steering wheel: press button ① in the windscreen wiper lever to confirm the menu point and rocker switch ② to change the menu
Fig. 14 Vehicles with multifunction steering wheel: control buttons for menus in the instrument cluster
First read and observe the introductory
information and safety warnings
Calling up the main menu
- Switch on the ignition.
- If a message or vehicle pictogram is being displayed, press button
on the windscreen wiper level or the
button on the
multifunction steering wheel .
- When operated using the windscreen wiper lever: press and hold the rocker switch to display the main menu or to return to the main menu from another menu.
- When operated using the multifunction steering wheel: the
main menu is not listed. To navigate through the individual menu
options, press the
or
button several times .
Opening a submenu
- Press the rocker switch on the windscreen wiper lever up or down, or
press the arrow buttons
or
on the multifunction steering
wheel until the required menu option is selected.
- The selected menu option is located between the two horizontal lines.
There is also a triangle on the right-hand side:
.
- To open the submenu, press button on the windscreen wiper lever, or
press the
button on the multifunction
steering wheel .
Making settings in the menu
- Make any desired changes using the rocker switch on the windscreen wiper lever or the arrow buttons on the multifunction steering wheel. If necessary, press and hold the controls to increase or decrease the values quickly.
- Mark and confirm your selection by pressing the button on the windscreen
wiper lever, or by pressing the
button on the multifunction
steering wheel.
Returning to the main menu
- Within the menu: in the submenu, select the Back menu option to leave the submenu.
- When operated using the windscreen wiper lever: press and hold the rocker switch .
- When operated using the multifunction steering wheel: press the
button .
Overview of the menu structure
First read and observe the introductory
information and safety warnings
MFD (multifunction display)
Driving time
Current fuel consumption (Curr. fuel con.)
Average fuel consumption ...
Main menu
First read and observe the introductory
information and safety warnings
Menu
Function
See
MFD
Information and settings for the mu ...
Other materials:
Controls for the heating and fresh air system
Fig. 127 In the centre console: rotary
controller of the heating and fresh air system with controls
First read and observe the introductory information
and safety warnings
Button, control
Additional information. Heating and fresh air system
...
Oxygen Sensor Unit Protective Pipes
Note
In addition to using the part number, the protective pipe
can also be used for identification.
Version D1, 6 openings, 3.5 mm each
Only used with the 4-pin oxygen sen ...
Introduction
This chapter contains information on the following subjects:
→ Information stickers and plates
→ Using the vehicle in other countries and continents
→ Radio reception and aerials
→ Volkswagen repair information
→ Declaration of conformity
→ ...
