VW Polo manuals

Volkswagen Polo Service & Repair Manual: Two-Part HS Hardener

Definition:
Two-Part HS Hardener -LHA 009 041 A3-
Two-Part HS Hardener, Short -LHA 021 004 A3-
Two-Part HS Hardener, Extra Short -LHA 009 046 A2-
Two-Part HS Hardener, Long -LHA 009 047 A3-
Two-Part HS Hardener, Extra Long -LHA 009 048 A3-
Edition 10/2014
Product Description
These are high solid hardeners for several HS fillers and clear coats.
Properties:
It has a high solid content for economical and environmentally friendly application.
The choice of five versions means it can adapt well to all painting conditions and ensure reliable application.
Application Instructions
Processing
Possible base components:
Two-Part HS Vario Filler. Refer to → Chapter „Two-Part HS Vario Filler“.
Two-Part HS Premium Filler. Refer to → Chapter „Two-Part HS Premium Filler“.
Two-Part HS Mixed Filler. Refer to → Chapter „Two-Part HS Mixed Filler“.
Two-Part HS Wet-in-Wet Filler. Refer to → Chapter „Two-Part HS Wet-in-Wet Filler“.
Two-Part HS Clear Coat. Refer to → Chapter „Two-Part HS Clear Coat“.
Two-Part HS Vario Clear Coat. Refer to → Chapter „Two-Part HS Vario Clear Coat“.
Area of application
1 -  The Two-Part HS Hardener -LHA 009 041 A3- is suitable for all complete and partial painting at normal temperatures.
2 -  The Two-Part HS Hardener, Short -LHA 021 004 A3- is suitable for partial painting at low temperatures and low spray booth ventilation volumes.
3 -  The Two-Part HS Hardener, Extra Short -LHA 009 046 A2- is suitable for spot repairs and partial painting at low temperatures.
4 -  The Two-Part HS Hardener, Long -LHA 009 047 A3- is suitable for all complete and partial painting at high temperatures.
5 -  The Two-Part HS Hardener, Long -LHA 009 048 A3- is suitable for all complete and partial painting at very high temperatures and is characterized by its good flow properties.
   
Mixture ratio:
–  Refer to the technical application instructions for the respective base components
Hardener selection guide
+ + -  Optimum
+ -  Suitable
- -  Partially suitable
- - -  Not suitable
 

Two-Part HS Hardener

Hardener selection Two-Part HS Hardener -LHA 009 041 A3- Two-Part HS Hardener, Short -LHA 021 004 A3- Two-Part HS Hardener, Extra Short -LHA 009 046 A2-
Partial or complete painting (large areas) + - - -
Partial painting (minor repairs) + + + + +
High temperatures above +25 °C (77 °F) + - - - -
Very high temperatures: +30 °C to +35 °C (86° to 95 °F) - - - - -
Normal temperature +20 °C to +25 °C (68° to 77 °F) + + - - -
Low temperature +15 °C to +20 °C (59° to 68 °F) - + + +
Oven drying + + + +
Air drying + + + + + +
 
     
Hardener selection Two-Part HS Hardener, Long -LHA 009 047 A3- Two-Part HS Hardener, Extra Long -LHA 009 048 A3-
Partial or complete painting (large areas) + + + +
Partial painting (minor repairs) + - -
High temperatures above +25 °C (77 °F) + + +
Very high temperatures: +30 °C to +35 °C (86° to 95 °F) + + +
Normal temperature +20 °C to +25 °C (68° to 77 °F) + + +
Low temperature +15 °C to +20 °C (59° to 68 °F) - - -
Oven drying + + + +
Air drying + +
 
     
Personal Protective Equipment:
Note the safety data sheets
Wear the personal protective equipment during application
Characteristics
 

Two-Part HS Hardener

  Two-Part HS Hardener, Extra Short -LHA 009 046 A2- All other two-part HS hardeners
Flashpoint: under +21 °C (69.8 °F) above +23 °C (73.4 °F)
 
     
Storage
All two-part HS hardeners have a guaranteed shelf life of 36 months from date of manufacture. Use no later than the date indicated on the label and store in original container at +20 °C (68 °F).
 

Two-Part HS Hardener

Storage Conditions
–  Protect against moisture.
 

Two-Part HS Hardener

–  Seal the container airtight immediately after removing the hardener.
 

Two-Part HS Hardener

Hardener
...

Two-Part VHS Hardener and Two-Part VHS Performance Hardener
Definition: Two-Part VHS Hardener -LHA 009 051 A2-/-LVM 009 051 A5- Two-Part VHS Hardener, Short -LHA 009 050 A2- ...

Other materials:

Introduction
This chapter contains information on the following subjects:  → Types of front passenger front airbag system  → Indicator lamps  → Description and function of the airbags  → Front airbags  → Switching the front passenger front airbag on and off manually u ...

Interior mirror
Fig. 78 Manual anti-dazzle interior mirror Fig. 79 Automatic anti-dazzle interior mirror First read and observe the introductory information and safety warnings The driver must adjust the interior mirror so that they can see clearly through the rear window. The driver’s rear view may ...

Fuses in the vehicle
Fig. 172 Dash panel on the driver side: fuse box cover Fig. 173 In the front left of the engine compartment: fuse box cover First read and observe the introductory information and safety warnings Fuses must always be replaced by a new fuse with the same amp rating (same colour and marki ...

© 2016-2026 Copyright www.vwpolo.net