Volkswagen Polo Service & Repair Manual: Two-Part Clear Coat
| Two-Part Clear Coat -LLS MAX 210- |
| The Two-Part Clear Coat - LLS MAX 210- is a high-gloss
two-component clear coat for long-lasting sealing of painted
surfaces. It is specially developed for part- and repair paint
jobs. This product is characterized by its resistance to weather
and chemicals, an exceptional gasoline resistance and good
polishability. The two-part clear coat has good flow properties
and tends to be used for larger surfaces (one to two vehicle
body parts). The raw material base is acrylic resin. The
hardener contains isocyanate. |
| Constant atomizing pressure |
| Excellent filling ability |
| Application area: touch up in part- and repair paint job
area |
| Professional painting result |
 Note
| For work safety, wear appropriate, personal protective
equipment: |
| Breathing mask type: A2/P2 |
| Latex or nitrile protective gloves, for example |
| Solvent- and water-soluble base paint systems |
| Old paints, cleaned and sanded |
|
|
|
| Base Surface |
Suitability |
| One-part base paint |
+++ |
| One-part water-based
paint |
+++ |
| Two-part top coat |
++ |
| Old paints |
+++ |
| Activating the Two-Part Spray Can: |
| – |
Before activating, thoroughly shake the can for two minutes. |
|
|
|
| – |
Remove the red push button on the cap and set it on the
valve for the hardener mixture on the bottom of the can. |
|
|
|
| – |
Press in the valve for the hardener mixture. Make sure when
pressing down the valve for the hardener mixture that the can
(with the cap) is upside down. |
|
|
|
| – |
After activating, thoroughly shake the can again for at
least two minutes. |
|
|
|
| Processing time/pot life: |
| – |
48 hours at +20 °C (68 °F) |
Note
| The processing time depends on the ambient temperature.
Higher temperatures lead to a shortened pot life. Lower
temperatures lead to a longer pot life. |
|
|
|
| – |
Apply one to two spray applications to cover (each
application 30 µm) with a 10 to 15 minute intermediate
ventilation time, depending on temperature. |
| – |
Maintain a distance of 20 to 25 cm. |
Note
| If the spraying procedure is interrupted, make sure that the
valve above the spray head is empty to prevent any nozzle
blockage. |
|
|
|
| Air drying at +20 °C (68 °F) room temperature is 12 hours. |
|
|
|
| The drying time with forced drying is at least 10 to 15
minutes. |
| Forced drying is at +60 °C (140 °F) object temperature for
35 to 40 minutes. |
|
|
|
| The drying time for IR drying is a minimum of 10 to 15
minutes. |
|
|
|
| Solid content: |
33.8 % in relation to
thinned paint |
| Yield: |
Approximately 0.5 to 0.75
m²/spray can with approximately 30-50 μm dry layer thickness |
| Gloss level: |
High-gloss |
| VOC value: |
668 g/L, 258 g/can |
| The guaranteed shelf life is 24 months from production date.
Use no later than the date indicated on the label and store in
original container at +20 °C (68 °F). |
|
|
|
Definition:
Two-Part Filler -LLS MAX 202 M2-, medium gray
Edition 03/2013
Product Description
...
Definition:
Two-Part Epoxy Primer Filler -LLS MAX 220 M1-, beige (250
ml)
Two-Part Epoxy Primer Filler -LLS MAX 22 ...
Other materials:
Odor from Evaporator or Heat Exchanger?
Fishy smell
–
From leak at cooling system of engine or of A/C system
heater core.
Note
If the fishy smell gets weaker when the temperature is set
to “cold” and stronger when i ...
Two-Part Thinner
Definition:
Two-Part Thinner -LVE 009 001 A5-
Two-Part Thinner, Long -LVM 009 300 A2-
Two-Part Thinner, Plus -LHA 014 000 A5-
Two-Part Thinner, Special -LVM 009 2 ...
Warning and indicator lamps
First read and observe the introductory information
and safety warnings
Lit up
Possible cause
Solution
Handbrake is applied.
Release the handbrake .
Brake system fault.
Do not drive on!
Obtain profe ...
© 2016-2024 Copyright www.vwpolo.net
Caution
WARNING
Two-Part Filler
Two-Part Epoxy Primer Filler