Volkswagen Polo Service & Repair Manual: Tread Depth, Measuring
Note
When measuring tread depth, take measurements in the main
grooves. |
Do not take measurements at the tread wear indicator. |
|
|
|
Tread depth of a tire must be measured in the main grooves
at the points showing the most wear. The positions of the tread
wear indicators are marked along the tire shoulder
-item 2-
→ Item. |
In place of “TWI”, there may also be a “Δ” or “VW emblem”. |
The TWI protrusions are 1.6 mm tall. This is the minimum
tread depth legally prescribed in Germany. |
Different values may apply in other countries. |
|
|
|
Tread Wear Indicators (TWI) must not be included in the
measurement. The deepest point of the groove must be used for
the measurement. |
A - |
Tread Wear Indicators in main grooves |
B - |
Main grooves with Tread Wear Indicators
-arrows- |
|
|
|
Heel-and-toe wear is step-like wear of individual tread
blocks, due to which an increased rolling noise can develop. The
heel-and-toe wear is caused by the uneven dis ...
In many causes, this is caused by driving style, but
sometimes it is also caused by incorrect axle adjustment.
...
Other materials:
Silicone Remover, Long -LLS MAX 008
Definition:
Silicone Remover, Long -LLS MAX 008-
Edition 10/2008
Product Description
The Silicone Remover, Long -LLS MAX 008- is a cleaning agent
that is rich in active ingre ...
Rear view
Fig. 3 Overview of the rear of the
vehicle
Key for :
Roof aerial
High-mounted brake light
Rear window
Rear window heating
Window aerial
Rear window wiper
Volkswagen badge, used for opening the
tailgate
Tail light cluster
Number plate lights
...
Masking or switching over headlights for driving abroad (travel mode)
First read and observe the introductory information
and safety warnings
If you have to drive a right-hand drive vehicle in a left-hand drive country,
or vice versa, the asymmetric dipped beam headlights may dazzle oncoming traffic.
Therefore, the headlights must be masked or switched over if ...
© 2016-2024 Copyright www.vwpolo.net