Fig. 147 Tyre tread: wear indicators
First read and observe the introductory information and safety warningsTread depth
Difficult driving situations demand the deepest possible tread depth for the tyres and the same tread depth for the tyres on the front and rear axles. This applies in particular for driving in winter weather and cold temperatures and in wet conditions .
In most countries, the minimum tread depth required by law is 1.6 mm (measured in the tread grooves next to the tread wear indicators). Observe any country-specific legal requirements.
Winter tyres lose a large degree of their effectiveness when the tread is worn down to a depth of 4 mm.
The tread depth of new tyres can vary according to type and manufacturer due to construction and tread design.
Tread wear indicator in tyres
The original tyres on your vehicle have 1.6 mm high tread wear indicators running across the tread . These wear indicators are positioned at set intervals around the tyre. Markings on the tyre sidewall (for instance the letters TWI or other symbols) indicate the positions of the tread wear indicators.
The tread wear indicators show if a tyre is worn down. The tyre must be replaced at the latest when the tread depth is just down to the tread wear indicator.
WARNING
Worn tyres are a safety risk and can lead to a loss of control of the vehicle and cause serious injury.Electrically Driven A/C Compressor, Flushing
Vehicles with a high voltage system
Observe all of the additional warnings for all work
performed on vehicles with the high voltage system. Refer to
→ Electrical Equipment; Rep. Gr.93.
...
Refrigerant Circuit Pipes and Hoses
Caution
Non-approved tools or materials such as leak sealing
additives can cause damage or malfunctions in the
system.
Only use tools and materials approved by the
manufactu ...
Infrared Dryer -VAS6873
Definition:
Infrared Dryer -VAS6873-
Product Description:
The short-wave infrared dryer is used to quickly dry paste,
filler, base paint, top coats and clear coats for minor repairs.
...