Exterior mirrors
Driving tipsWiring Eyelets, Repairing
Special tools and workshop equipment
required
Torque Wrench 1331 5-50Nm -VAG1331-
Note
Do not use rust remover, contact spray or grease because the
lack of friction will cause the torque to be ...
Adhesive Surface Pretreatment when Replacing Laser-Soldered Roofs
Dry sand the cataphoretic primer on the roof adhesive surface
-item 6-
→ Item down to the bare metal using P180 sandpaper.
–
Dry sand the roof pillar adhesive surface
...
Checklist
Carry out the steps in the specified order :
With the engine at operating temperature,
park the vehicle on a level surface to ensure that the engine oil reading is
correct.
Switch off the engine and wait a few minutes
for the engine oil to flow back into the sump.
Open the ...