VW Polo manuals

Volkswagen Polo Service & Repair Manual: Trailer Socket

Connect the trailer socket to the vehicle electrical system of the vehicle pulling the trailer according to the manufacturer instructions.
Refer to the applicable wiring diagrams or manufacturer installation instructions when installing the trailer hitch.
Technical Requirements
Factory-Installed Trailer Hitch If the vehicle was already delivered from the factory with a trailer hitch, all of the technical and legal requirements for towing a ...

7-Pin« Trailer Socket
If more electrical consumers need to be connected than the »7-pin« socket allows, a second »7-pin« socket must be installed. Pin assignment must conform to DI ...

Other materials:

Test after driving for 10 minutes
First read and observe the introductory information and safety warnings Reconnect the tyre filler hose and check the tyre pressure on the tyre pressure display ⑥. 1.3 bar (19 psi / 130 kPA) and lower: Do not drive on! The tyre cannot be sealed adequately with the breakdown set. ...

Coolant specification
First read and observe the introductory information and safety warningsThe cooling system is filled at the factory with a mixture of specially prepared water and at least 40% coolant additive G 13 (TL-VW 774 J). The coolant additive is dyed purple. This mixture of water and coolant additive ...

Introduction
This chapter contains information on the following subjects:  → Indicator lamp  → Windscreen wiper lever  → Windscreen wiper functions  → Service position for the front windscreen wipers  → Rain/light sensor  → Checking and refilling the windscree ...

© 2016-2026 Copyright www.vwpolo.net