Volkswagen Polo Service & Repair Manual: Tires, Mounting
- Tires, Dismounting
- Tire Sealant, Removing
- Tires, Dismounting
- Tires, Bringing to Mounting Temperature
- Tires, Mounting
- Tires and Rims, Matching
- Wheel, Balancing
Overview - Wheel, RAX
1 -
Wheel
Installing the wheel. Refer to
→ Chapter „Wheel, Mounting“.
2 -
Wheel Bolts
There a ...
Tires, Dismounting
Remove the valve insert.
Note
If equipped handle the glued-on wheel trim carefully.
Surface slightly scratched.
...
Other materials:
Towing Recognition Control Module -J345
General Information
The Towing Recognition Control Module -J345- recognizes
“trailer mode” when there is a power decrease of at least 5 W
→ Note and transmits this information to various control
modules via the CAN data bu ...
Wheel, Balancing with Fine Balancing Machine (Finish Balancer)
Before beginning balancing, the following requirements must
be fulfilled.
The tire pressure must be OK.
The tire profile must not be worn on one side. The tire
profile must be at least 4 mm.
...
6-Pin Universal Oxygen Sensor, Removing and Installing
Note
Use the faulty sensor as a guide for installing all of the
accompanying attachments, cable ties or marking bands.
Do not crimp or cut the wires otherwise the functionality of
the heated oxygen sensor (HO2S) will ...
