Volkswagen Polo Service & Repair Manual: Tire Service Life, Influences
| The following factors influence the service life of a tire
in varying degrees. |
| Exterior temperature/climate |
| Dynamic toe and camber values |
| Tire Operating Conditions |
| Changes to the Suspension: |
| If a “lowering-kit” and /or light alloy wheels from
accessories which have not been approved by the vehicle
manufacturer are used, wheel alignments which deviate from the
alignment specified in design may occur during travel. |
| Even if the adjustment of the axle geometry measured on a
standing vehicle is correct, changes in the body height and
positions of the wheels during travel can lead to changes to the
paths of travel of the wheel suspension. |
| For this reason, uneven wear is pre-programmed. |
|
|
|
Heel-and-toe wear is step-like wear of individual tread
blocks, due to which an increased rolling noise can develop. The
heel-and-toe wear is caused by the uneven dis ...
Other materials:
Checking with Restrictor, Reservoir and A/C Compressor Regulator Valve
-N280-, Externally Regulated A/C Compressor
Note
Connecting service station. Refer to
→ Chapter „Connecting Service Station“.
Observe test requirements. Refer to
→ Chapter „Pressures, Checking“.
–
...
Switching the TCS on and off
Fig. 116 In the centre console: button
for switching the TCS on and off manually
First read and observe the introductory information
and safety warnings The electronic stability control (ESC) only
functions when the engine is running. It consists of ABS, EDL and TCS.
When the engine is r ...
Warning and indicator lamps
First read and observe the introductory information
and safety warnings Depending ont eh vehicle equipment scope,
an electrohydraulic or an electromechanic steering system may be fitted.
Lit up
Possible cause
Solution
Electrohy ...
© 2016-2026 Copyright www.vwpolo.net
