Siemens Wheel Electronics Tire Pressure Monitoring Sensor, Removing and
Installing
Tire Sealant, Expiration DateWheel, Balancing, Tire and Wheel Radial and Lateral Run-Out, Checking
Before beginning balancing, the following requirements must
be fulfilled.
The tire pressure must be OK.
The tire profile must not be worn on one side. The tire
profile must be at least 4 mm.
...
Rain/light sensor
Fig. 75 Windscreen wiper lever: setting
the rain/light sensor Ⓐ
Fig. 76 Sensitive surface of the rain/light
sensor
First read and observe the introductory information
and safety warnings
When the rain/light sensor is activated, it automatically controls the frequency
of the wiper inte ...
Waxing and polishing the vehicle
First read and observe the introductory information
and safety warningsWaxing
Waxing protects the paintwork. You will need to re-wax the vehicle with a good
hard wax if water no longer clearly forms small drops
and runs off the paintwork when it is clean.
Even if a wax solution is used regul ...