VW Polo manuals

Volkswagen Polo Service & Repair Manual: Tire Pressure Sensor and Metal Valve, Removing and Installing

Special tools and workshop equipment required
Torque Wrench 1410 -VAG1410- and Torque Wrench 1331 5-50Nm -VAG1331-
–  Place metal valve with rubber seal through rim from inside.
–  Attach chamfered washer and union nut from outside and tighten by hand.
–  Tighten the union nut.
  Note
If equipped handle the glued-on wheel trim carefully. Surface slightly scratched.
Replace the damaged rim wheel trim.
1)  TPMS direct measuring. The wheel electronics are installed inside the wheel on the metal valve; the tire pressure and temperature values are transmitted and evaluated periodically.
2)  TPMS + indirect measuring. There are no wheel electronics installed inside the wheel. With the help of the ABS sensors, the TPMS compares the speed and rolling circumference of the individuals wheels. The loss of pressure is determined indirectly. If there is a change in the tire pressure, then the speed and the rolling circumference of wheel will also change.
3)  TPMS indirect measuring. There are no wheel electronics installed inside the wheel. With the help of the ABS sensors, the TPMS compares the rolling circumference of the individual wheels. The loss of pressure is determined indirectly. If there is a change in the tire pressure, then the speed of the tire will also change.
   
–  Secure against turning with counterhold -1- (for example, a 2 mm drill bit).
  Note
If equipped handle the glued-on wheel trim carefully. Surface slightly scratched.
Replace the damaged rim wheel trim.
Tightening Specifications. Refer to → Anchor.
 

Tire Pressure Sensor and Metal Valve, Removing and Installing

Tire Pressure Monitoring Sensor without Valve, Removing and Installing, Vehicle Before Customer Delivery
Special tools and workshop equipment required Torque Wrench -VAG1410- Perform the Following: Remo ...

Beru Wheel Electronics Tire Pressure Monitoring Sensor, Removing and Installing
Overview, Beru System   WARNING If tire sealant was used, then the wheel electronics on that particul ...

Other materials:

Vibration, Vibration Control System
Expanded functions can be performed using Hunter RFT33VAG Road Force Touch™ Wheel Balancer -VAS6230B4- in addition to the previously known balancers. A special characteristic of this system is testing the radial force of wheel/tire dur ...

Handling wheels and tyres
Fig. 145 Diagram showing how to swap wheels First read and observe the introductory information and safety warningsThe tyres are the most used and most underestimated parts of a vehicle. Tyres are very important as the narrow tyre surfaces are the only contact between the vehicle and the ro ...

Opening the tailgate
Fig. 29 In the vehicle key: tailgate release button Fig. 30 Opening the tailgate from the outside First read and observe the introductory information and safety warnings Before opening the tailgate, always remove any items of luggage that are on the luggage carrier attached to the tailg ...

© 2016-2024 Copyright www.vwpolo.net