Volkswagen Polo Service & Repair Manual: Tire Pressure Monitoring Sensor without Metal Valve, Removing and
Installing, Service Version
Special tools and workshop equipment
required |
– |
Remove the tire from the disc wheel. Refer to
→ Chapter „Tires, Mounting“. |
|
|
|
See Which Version is Installed Before Starting Any Work. |
The tire pressure monitoring sensor is attached to the valve
with an inner TORX screw -1- on the
Service version. |
If the service version is installed, the following repair
procedure must be used. Refer to
→ Anchor. |
II - Vehicles Before Customer Delivery |
The tire pressure monitoring sensor is attached to the valve
with a square screw with a flat head -2-
on vehicles before customer delivery. |
If the production version is installed, the following repair
procedure must be used. Refer to
→ Anchor. |
– |
Remove the screw
-arrow- from the tire pressure
monitoring sensor -1-. |
|
|
|
– |
Counterhold metal valve using retainer (for example 2 mm
spiral bore) while doing so. |
Caution
Clean the valve opening before installing the Tire
Pressure Monitoring Sensor. |
|
|
|
|
– |
Press the tire pressure monitoring sensor
-1- onto the disc wheel (rim) and
tighten -arrow-. |
– |
Counterhold metal valve using retainer (for example 2 mm
spiral bore) while doing so. |
Note
Visually check the valve after installing it and make sure
it is tight. The tire pressure monitoring sensor
-1- must not have any play when it
is installed and it must touch the supports in the rim bed. |
Do not tighten the valve again to the tightening
specification after it has been installed. |
Tightening Specifications |
Refer to
→ Chapter „Overview - Tire Pressure Monitoring Sensor without
Valve“ |
|
|
|
Removing
–
Remove the union nut -1-.
–
Remove Tire Pressure Moni ...
Special tools and workshop equipment
required
Torque Wrench -VAG1410-
Perform the Following:
Remo ...
Other materials:
Reservoir
Caution
Non-approved tools or materials such as leak sealing
additives can cause damage or malfunctions in the
system.
Only use tools and materials approved by the
manufactu ...
Long-Term Underbody Protection -D 314 D37 M2-, Black
Definition:
Long-Term Underbody Protection -D 314 D37 M2-, Black
Edition 02/2010
Product description of Long-Term Underbody Protection -D 314
D37 M2-, Black
Long-Term Underbo ...
Anti-theft alarm
First read and observe the introductory information
and safety warnings
Depending on the vehicle equipment level, the vehicle may have an anti-theft
alarm and a SAFELOCK mechanism .
The anti-theft alarm makes it more difficult to break into the vehicle or steal
it.
The anti-theft alarm is ...
© 2016-2024 Copyright www.vwpolo.net