Fig. 119 In the upper part of the centre console: button for the start/stop system
First read and observe the introductory information and safety warningsIf the start/stop system is activated, the engine will be switched off automatically when the vehicle is stationary. When required, the engine restarts automatically.
The function is automatically activated every time the ignition is switched on. The instrument cluster display will show information about the current status.
Always switch off the start/stop system manually when driving through water.
Vehicles with a manual gearbox
Vehicles with an automatic gearbox
Important preconditions for automatic engine switch-off
Conditions for an automatic restart
The engine can start automatically under the following conditions:
Conditions that make a key start necessary
The engine has to be started manually with the vehicle key in the following conditions:
Switching the start/stop system on and off manually
If the start/stop system has switched the engine off, the engine will start again as soon as the system has been switched off manually with the button.
WARNING
The brake servo and the steering will not function if the engine is switched off.NOTICE
If the start/stop system is used in very high outside temperatures over a long period, the vehicle battery can be damaged.In some cases, it will be necessary to restart the engine manually with the vehicle key. Follow any corresponding messages on the instrument cluster display.
Battery Tester Charger Kit -GRX3000VAS- Troubleshooting
Sometimes the display shows the malfunction or the messages
based on the condition.
The following is a list of the most frequent displayed
messages together with suggested solutions.
Note
Refer to the Batt ...
Suction Feed Spray Gun -VAG1538
Definition:
Suction Feed Spray Gun -VAG 1538-
Product Description:
For the retroactive sealing of cavities in all new and used
cars, as well as for applying underbody protection materials.
...
One-Part Clear Coat
Definition:
One-Part Clear Coat -LLS MAX 010-
Edition 10/2008
Product Description
The One-Part Clear Coat -LLS MAX 010- is a single-compound
product. The raw material base is ...