VW Polo manuals

Volkswagen Polo Service & Repair Manual: Special Tools

Special tools and workshop equipment required
   
Torque Wrench 1331 5-50Nm -VAG1331-
Crimping Pliers, Complete -VAS1978/1A-
 

Special Tools

Exchangeable Head, 0.35mm² - 2.5mm² -VAS1978/1-1-
Diagnostic Cable -VAS5051/5A- (3 m) (10 ft.)
 

Special Tools

Diagnostic Cable -VAS5051/6A- (5 m) (16 ft.)
 

Special Tools

Fiber Optic Pliers Repair Set -VAS6223A-
 

Special Tools

Air Hose Pliers -VAS6228-
Repair Set, Aerial Cable -VAS6720-
 
 
 
 
Edition: K0059101321 - FU - 5/8/2014 – JLH
 

Special Tools

Oxygen Sensor Unit Protective Pipes
  Note In addition to using the part number, the protective pipe can also be used for identification. Version D1, 6 openings, 3.5 mm eac ...

Refrrigerant R134a Servicing
...

Other materials:

Wheel, Balancing, Tire and Wheel Radial and Lateral Run-Out, Checking
Before beginning balancing, the following requirements must be fulfilled. The tire pressure must be OK. The tire profile must not be worn on one side. The tire profile must be at least 4 mm. ...

EU Tire Label, Categories
Rolling Resistance. Refer to → Anchor Wet Grip. Refer to → Anchor Noise Emission. Refer to → Anchor     Rolling Resistance ...

Checking with Restrictor, Reservoir and A/C Compressor Regulator Valve -N280-, Externally Regulated A/C Compressor
  Note Connecting service station. Refer to → Chapter „Connecting Service Station“. Observe test requirements. Refer to → Chapter „Pressures, Checking“. –  ...

© 2016-2026 Copyright www.vwpolo.net