Volkswagen Polo Owners Manual: Settings menu
First read and observe the introductory
information and safety warnings
| Settings menu | Function |
|---|---|
| Language | Setting the language for the display texts and messages in the navigation system. |
| MFD data | Settings for which MFD data should appear in the instrument cluster display . |
| Time | Setting the hours and minutes for the clock in the instrument cluster and in the navigation system. The time can be shown in a 12 and 24 hour display. An S may be shown in the upper part of the display to indicate that summer time is selected. |
| Winter tyres | Setting the visual and acoustic speed warning. Use this function only when winter tyres are fitted which are not designed for the vehicle's top speed. |
| Units | Setting the units for temperature, consumption values and distances. |
| Alt. speed dis. | Switching the second speed display on or off. |
| Travel mode | Adjusting the headlights in countries in which the traffic drives on the other side of the road. A tick is visible when the headlights on a left-hand drive vehicle are switched for driving on the left. The travel mode may only be used for a short period. |
| Service | Call up service messages. |
| Factory setting | Some functions in the Setup menu are reset to the factory settings. |
| Back | The display returns to the main menu. |
MFD (multifunction display) menu
First read and observe the introductory
information and safety warnings
The multifunction display (MFD) is equipped with two automatic memories:
1 - Trip memory and 2 - Total journey memory.
The ...
Other materials:
Overview - Wheel, Standard
1 -
Wheel
Installing the wheel. Refer to
→ Chapter „Wheel, Mounting“.
2 -
Wheel Bolts
There are different versions. Refer to
→ Chapter „Wheel Bolts“.
3 -&nb ...
Introduction
This chapter contains information on the following subjects:
→ Warning and indicator lamps
→ Information on steering
Additional information and warnings:
Starting and stopping the engine
Battery
Tow-starting and towing
WARNING
The steeri ...
Compressor Types, Checking Pressures
Note
Check cooling performance. The A/C system is functioning
correctly when the air flowing from the instrument panel vents
has a temperature of 70C or lower.
Setting on Climatronic “LO”.
...
