Wax Spray -D 322 100 M2
Polyurethane Adhesive SealantWheel, Balancing, Tire and Wheel Radial and Lateral Run-Out, Checking
Before beginning balancing, the following requirements must
be fulfilled.
The tire pressure must be OK.
The tire profile must not be worn on one side. The tire
profile must be at least 4 mm.
...
Removing and fitting head restraints
First read and observe the introductory information
and safety warnings
Every seat is fitted with a head restraint. The centre rear head restraint is
designed solely for use with the centre rear seat. This head restraint should therefore
not be installed in any of the other positions.
Remov ...
Wires with Cross Section up to 0.35 mm 2,
Repairing
Special tools and workshop equipment
required
Crimping Pliers - .35-2.5mm -VAS1978/1A-
Wiring Harness Repair - Crimping Head - .35-2.5mm
-VAS1978/1-1-
When repairing wires with a cross- ...