Volkswagen Polo Service & Repair Manual: Refrigerant Circuit Pressures and Temperatures
WARNING
| When performing work on refrigerant circuit, observe
all generally applicable safety precautions and pressure
vessel regulations. |
|
| The pressures and temperatures in the refrigerant circuit
depend on the current operating conditions (such as engine RPM,
coolant fan level 1, 2 or 3, engine temperature, A/C compressor
on or off) as well as on the effects of outside influences (such
as outside temperature, humidity, desired cooling output). |
| In vehicles with A/C Compressor Regulator Valve -N280-, the
pressure is modified on the low pressure side by the valve. |
| For this reason, values indicated in the following table are
valid only as reference points. They are attained at an engine
speed of 1,500 to 2,000 RPM and an ambient temperature of 20 °C
(68 °F) after about 20 minutes. |
| The connections provided for measuring pressure for the
manometer battery are located in the vehicle-specific
refrigerant circuit. |
| At 20 °C (68 °F) with the engine not running, the pressure
in the refrigerant circuit is 4.7 bar (68.17 psi). Refer to
→ Chapter „Refrigerant R134a Vapor Pressure Table“. |
|
|
|
Function:
The Evaporator Vent Temperature Sensor -G263- or Evaporator
Temperature Sensor -G308- determines the temperature behind the
evaporato ...
A-Low pressure side of refrigerant circuit.
B-High pressure side of refrigerant circuit.
Component
...
Other materials:
Wear Spots
A wear spot is a flat spot on the tread of the tires that
can be caused by extreme braking maneuvers on subsurface such as
asphalt.
At the same time a tire during the braking maneuver is
rubbed at selective points which ...
Introduction
This chapter contains information on the following subjects:
→ Preparing for a journey and driving safely
→ Driving abroad
→ Driving through water on roads
Depending on where the vehicle is used, it could be a good idea to have an engine
and transmission guard insta ...
Pneumatic Brush Grinder Set -VAS6446
Definition:
Pneumatic Brush Grinder Set -VAS6446-
Product Description:
The Pneumatic Brush Grinder Set -VAS6446- serves to prepare
the surface.
For example: removes underbody ...
© 2016-2026 Copyright www.vwpolo.net
Evaporator Vent Temperature Sensor -G263- or Evaporator Temperature Sensor
-G308
Refrigerant Circuit with Expansion Valve