Refrigerant Circuit, General PrecautionsContacts in Contact Housing, Repairing
First, open or release if necessary the secondary lock of
the contact housing. Refer to
→ Chapter „Contact Housings, Releasing and Disassembling“.
–
Release contact (primary ...
Adhesive Surface Pretreatment when Replacing Laser-Soldered Roofs
Dry sand the cataphoretic primer on the roof adhesive surface
-item 6-
→ Item down to the bare metal using P180 sandpaper.
–
Dry sand the roof pillar adhesive surface
...
Beru Wheel Electronics Tire Pressure Monitoring Sensor, Removing and
Installing
Overview, Beru System
WARNING
If tire sealant was used, then the wheel electronics
on that particular wheel must be replaced.
WA ...