Volkswagen Polo Service & Repair Manual: Refrigerant Circuit Connections with Valve for Switches
 Note
| For switching pressures, removing and installing switches
and switch arrangement and version, see vehicle-specific
refrigerant circuit. |
WARNING
| There is a danger of ice-up. |
| Refrigerant will leak out if refrigerant circuit is
not discharged. |
| Refrigerant must be extracted before removing valve
-C-. If refrigerant circuit
is not opened within 10 minutes of extraction, pressure
may form in refrigerant circuit due to evaporation.
Extract the refrigerant once more. |
|
| Different threads for switch on high pressure and low
pressure sides.
|
|
|
|
| Only valves and o-rings that are resistant to refrigerant
R134a and refrigerant oil must be installed. |
| A - |
Connection (soldered in) |
|
|
|
Note
For switching pressures, removing and installing switches
and switch arrangement and version, see vehicle-specific
refrigerant circuit.
...
Note
For switching pressures, removing and installing switches
and switch arrangement and version, see vehicle-specific
refrigerant circuit.
...
Other materials:
Warning lamp
First read and observe the introductory information
and safety warnings
Lit up
Possible cause
Solution
Fault in the alternator.
Go to a qualified workshop. The electrical system should
be checked.
Switch off all electrical ...
Loading the trailer
First read and observe the introductory information
and safety warnings
Trailer weight and drawbar load
The trailer weight is the weight that the vehicle can pull . The drawbar load
is the weight that the towing bracket exerts on the ball coupling vertically from
above .
The figures for tr ...
Tread Depth, Measuring
Note
When measuring tread depth, take measurements in the main
grooves.
Do not take measurements at the tread wear indicator.
Tread depth of a tire must be mea ...
© 2016-2024 Copyright www.vwpolo.net
A/C Refrigerant Low Pressure Switch -F73
A/C Pressure Switch -F129