VW Polo manuals

Volkswagen Polo Owners Manual: Recycling and scrapping end-of-life vehicles

Volkswagen Polo Owners Manual / Vehicle care and maintenance / Consumer information / Recycling and scrapping end-of-life vehicles

First read and observe the introductory information and safety warnings

Recycling end-of-life vehicles

Volkswagen has already made provision for you to recycle your vehicle in an environmentally responsible manner. The recycling system operating in many European countries will take back your vehicle at the end of its useful life. Once the vehicle has been recycled, a certificate of destruction will be issued to show that the vehicle has been disposed of correctly.

End-of-life vehicles are recycled free of charge, provided that national legislation is complied with.

Further information on the recycling of end-of-life vehicles can be found at a Volkswagen dealership.

Scrapping

The relevant safety requirements must be observed when the vehicle or components of the airbag and the belt tensioners are scrapped. Qualified workshops are familiar with these requirements.

Declaration of conformity for wheels and tyres
First read and observe the introductory information and safety warningsTyres fitted in the vehicle meet the requirement of BIS and comply with the requirements under the Central Motor Vehicle Rule ...

Engine management system and exhaust purification system
...

Other materials:

Handbrake
Fig. 115 Handbrake between the front seats First read and observe the introductory information and safety warnings Applying the handbrake Lift the handbrake lever up fully. The handbrake is applied when the indicator lamp lights up in the instrument cluster   . Releasing ...

Tires, Mounting, Run-Flat Tires and Ultra High Performance Tires
Only trained personnel can perform the assembly work on run-flat tires and ultra high performance tires. If equipped check the tire pressure monitoring sensor with the vehicle diagnostic tester and if necessary replace. ...

Tire Pressure Sensor and Metal Valve, Removing and Installing
Special tools and workshop equipment required Torque Wrench 1410 -VAG1410- and Torque Wrench 1331 5-50Nm -VAG1331- –  Place metal valve with rubber seal through rim from inside. ...

© 2016-2025 Copyright www.vwpolo.net