Fig. 194 In the rear bumper on the right-hand side: removal of the covers for the towing eye
Fig. 195 In the rear bumper: removal of the covers for the towing eye
First read and observe the introductory information and safety warningsThere is a fixed towing eye located underneath the rear bumper on the right-hand side or . Depending on the vehicle equipment, a cover may be fitted on the towing eye or in the bumper. The cover must be removed before usage.
Comply with the notes on towing .
Variant A: Removing and fitting cover
Variant B: Removing and fitting cover
Variant C: Removing and fitting cover
Variant D: Removing and fitting cover
Vehicles with a factory-fitted towing bracket
If the vehicle has a factory-fitted towing bracket, it can also be used for towing other vehicles. The towing bracket ball coupling should be fitted and used for towing .
NOTICE
The towing eye must always be screwed firmly into the mounting. Otherwise, the towing eye can be ripped out of the mounting when the vehicle is being tow-started or towed. NOTICEVehicles with a factory-fitted towing bracket must use only tow bars that are specially designed for fitting to a ball coupling. If you use an unsuitable tow bar, the ball coupling and the vehicle could be damaged. You should use a tow rope instead.
Changing a wheel
Fig. 170 Changing the wheel:
removing the wheel bolts with the screwdriver handle
First read and observe the introductory
information and safety warnings
Removing the wheel
Read the checklist .
Loosen the wheel bolts .
Jack up the vehicle .
Using the hexagonal socket ...
Infrared Dryer -VAS6877
Definition:
Infrared Dryer -VAS6877-
Product Description:
The infrared dryer is used to dry paste, filler, base paint,
top coats and clear coats on vertical and horizontal surfaces.
...
Using the vehicle in other countries and continents
First read and observe the introductory information
and safety warningsThe vehicle has been manufactured specifically for a particular
country and complies with the registration regulations that applied in that country
at the time of vehicle production.
If the vehicle is to be sold in anothe ...