Volkswagen Polo Service & Repair Manual: Primary Lock
| The primary lock is the locking mechanism of an individual
crimp contact in the contact housing. |
| If necessary, housing securing mechanisms (secondary locks)
must be released or removed using specified tool before
releasing the contacts. Refer to
→ Chapter „Secondary Lock“. |
| The shapes of the primary locks depicted in the following
are only a selection which, as an example, should make clear the
various functions of the primary lock. |
| Round connector systems. Refer to
→ Chapter „Round Connector Systems“. |
| Flat connector systems. Refer to
→ Chapter „Flat Connector Systems“. |
| Special connector systems. Refer to
→ Chapter „Special Connector Systems“. |
| The allocation of the correct release tool for the
respective locks can be found in the table in the Release Tool
Set -VAS1978/35- Operating Instructions. |
|
|
|
The secondary lock is a housing securing mechanism (second
locking mechanism) that secures all wires in one contact
housing. If a secondary lock is installed at a con ...
Note
If necessary, housing securing mechanisms (secondary locks)
must be released or removed using specified tool before
releasing the contacts. Refer ...
Other materials:
New wheels and tyres
First read and observe the introductory information
and safety warningsNew tyres
Drive particularly carefully for the first 600 km with new tyres as the
tyres have to be run in. Tyres that have not been run in have reduced
grip and braking effect .
All four wheels must be fitted ...
Pressure Gauge, Tests and Measurements
Indicators on pressure gauge
1 -
Temperature scale for refrigerant R134a CF3–CH2F or
CH2F–CF3.
2 -
Pressure scale
The pressure gauge may have one or more temperature s ...
Protecting
Caution
Missing protection leads to the electrical system
damage.
Note
All threaded connections must be tightened to the specified
torque.
...
© 2016-2024 Copyright www.vwpolo.net
Secondary Lock
Round Connector Systems