Volkswagen Polo Owners Manual: Preparing the vehicle for working in the engine compartment
First read and observe the introductory information
and safety warnings
Introduction
This chapter contains information on the following subjects:
→ Preparing the vehicle for working in the engine compartment
→ Opening and closing the bonnet
Always park the vehicle ...
Checklist
The following steps should always be carried out in the specified
order before working in the engine compartment :
Park the vehicle on a level and stable surface.
Depress and hold the bra ...
Other materials:
Valve, Removing and Installing, Rubber Valve
Make sure wheel rim is clean.
–
Using the Valve Fitting Tool Valve Fitting Tool -VAS6459--1-,
insert a new tire valve.
–
Remove the valve insert.
...
Cruise Control System, Activating and Deactivating
General Description
Cruise control system functions are controlled by the engine
control module.
–
Cruise control system can be activated/deactivated. Refer to
→ Chapter „Cruise Control
Sy ...
4-Pin Heated Oxygen Sensor (HO2S), Removing and Installing
Note
Do not repair the heated oxygen sensor wires. Repairing may
result in malfunctions.
Use the faulty sensor as a guide for installing all of the
accompanying attachments, cable ties or marking bands.
...
