Volkswagen Polo Owners Manual: Pedals

Volkswagen Polo Owners Manual / Starting the engine, changing gear and parking / Changing gear / Pedals

Fig. 108 Pedals in vehicles with a manual gearbox: ① accelerator, ② brake pedal, ③ clutch pedal

Fig. 109 Pedals in vehicles with an automatic gearbox: ① accelerator, ② brake pedal

First read and observe the introductory information and safety warnings

The operation and freedom of movement of all pedals must never be impaired by objects or floor mats.

Only use floor mats that leave the pedal area free and can be securely fastened in the footwell.

If a brake circuit fails, you will have to depress the brake pedal further than normal in order to bring the vehicle to a stop.

WARNING

Objects in the driver footwell can hinder pedal operation. This can lead to loss of control of the vehicle and increase the risk of serious injury.

Please ensure that all pedals can always be operated without any hindrance.

The foot mats must always be properly secured in the footwell.

No additional foot mats or other floor coverings should be placed over the fitted foot mat.

Ensure that no objects can enter the driver footwell while the vehicle is in motion.

If there are any objects in the footwell, remove them when the vehicle is parked.

NOTICE

The pedals must be freely operable at all times. For example, the braking distance to fully stop the vehicle will be longer if a braking circuit is faulty. The brake pedal will have to be depressed further and harder than normal.

Warning and indicator lamp

First read and observe the introductory information and safety warnings Lit up Possible cause Solution Dual clutch gearbox DSG® ov ...

Manual gearbox: selecting a gear

Fig. 110 Gear shift pattern of a 5 or 6-speed manual gearbox First read and observe the introductory information and safety warnings The positions of the individual driving gears are shown o ...

Other materials:

Indicator lamps
First read and observe the introductory information and safety warnings Lit up Possible cause Solution Engine management system fault (Electronic Power Control). The engine should be checked by a qualified workshop as s ...

Welding and Soldering on Refrigeration Systems
Before performing welding or soldering work on vehicles near the air conditioning system components, extract the refrigerant and remove the residue by flushing with compressed air and nitrogen. The products of refrigerant decomposition d ...

Two-Part HS Hardener
Definition: Two-Part HS Hardener -LHA 009 041 A3- Two-Part HS Hardener, Short -LHA 021 004 A3- Two-Part HS Hardener, Extra Short -LHA 009 046 A2- Two-Part HS Hard ...