VW Polo manuals

Volkswagen Polo Service & Repair Manual: Overview - Tire Pressure Monitoring Sensor with Valve

Overview - Tire Pressure Monitoring Sensor with Valve

1 -  Tire Pressure Monitoring Sensor
Supplied complete as a service part
Removing and Installing. Refer to → Chapter „Tire Pressure Monitoring Sensor with Valve, Removing and Installing“.
When battery is discharge, the entire Tire Pressure Monitoring Sensor must be replaced
After using a wheel repair kit, the bore for the valve and opening of the pressure sensor must be wiped clean.
2 -  Valve Insert
Allocation. Refer to the Parts Catalog.
Replace at every tire change
  Note
Use only original manufacturer valve insert, it has a special coating!
3 -  Sealing Washer
is slightly deformed when tightening the union nut -item 6- → Item
4 -  Seal
5 -  Disc Wheel
Mounting tires with emergency running characteristics. Refer to → Chapter „Tires, Mounting, Run-Flat Tires and Ultra High Performance Tires“.
Mounting tires (wheels with tire pressure monitoring system). Refer to → Chapter „Tires, Mounting, Wheels without and with Tire Pressure Monitoring System“
6 -  Union Nut
8 Nm
7 -  Valve Cap
Use only original valve caps from the repair set. Refer to the Parts Catalog.
Do not use Comfort valve caps and metal caps
Overview - Tire Pressure Monitoring Sensor
...

Overview - Tire Pressure Monitoring Sensor without Valve
1 -  Valve Cap 2 -  Nut Individual component of -item 7- → Item Tightening specification. Refer to ...

Other materials:

A/C Service Station, Emptying
  Caution If it is suspected that chemicals were added to the refrigerant circuit to seal leaks, do not connect the A/C service station and do not extract the refrigerant. ...

Ultrasound A/C Cleaner -VAS6189B
The Ultrasonic HVAC Cleaning System -VAS6189A- is placed in the front passenger footwell and sprays Aero-Clean. Aero-Clean neutralizes microbes and bacteria inside the heater and A/C unit. The unit comes with Operating Instructions. ...

Introduction
This chapter contains information on the following subjects:  → Preparing the vehicle for working in the engine compartment  → Opening and closing the bonnet Always park the vehicle on a level and stable surface before carrying out any work in the engine compartment. The engine ...

© 2016-2026 Copyright www.vwpolo.net