Volkswagen Polo Service & Repair Manual: Matting Component -LVM 769 810 A2
| Matting Component -LVM 769 810 A2- |
| With two-part HS clear coats and two-part HS top coat, the
Matting Component - LVM 769 810 A2- creates a matted top coat
coating for metal and plastic finishes. |
| Areas of application include large surfaces/complete
painting as well as small- and attachment parts. |
| Hardened, well-preserved and sanded old paint or factory
paints |
| Primed and filled metal- and plastic parts |
 Note
| For information about plastic parts, refer to "The VW/Audi
Coating System for Plastic Parts" (Data Sheet 5.74). |
| Two-Part HS Clear Coat -L2K 769 500 A5- |
| Two-Part HS Vario Clear Coat -L2K 769 K01 A2- |
| Two-Part HS Optimum Plus Clear Coat -LZK 769 K07 A5- |
| Two-Part HS Brilliant Plus Clear Coat -LZK 769 K05 A5- |
| Two-Part HS Performance Clear Coat -LZK 769 K06 A5- |
| Two-Part HS Mixed Paint/Top Coat -L2K 074/073...- |
| Two-Part HS Hardener, Long -LHA 009 047 A3- |
| Two-Part HS Hardener, Extra Long -LHA 009 048 A3- |
| Two-Part VHS Hardener, Long -LHA 009 052 A2-/-LHA 009 052
A3- |
| Two-Part VHS Hardener, Extra Long -LHA 009 053 A2- |
| For hardener, refer to the technical application
instructions here
→ Chapter „Hardener“. |
| Two-Part Thinner -LVE 009 001 A5- |
| Two-Part Thinner, Long -LVM 009 300 A2- |
| Two-Part Thinner, Special -LVM 009 200 A2-/-LVM 009 200 A5- |
| Clear Coat Additive -LVM 007 000 A2- |
| Gloss Level Adjustment/Matting and Application Instructions |
Note
| Refer to "Gloss Level Adjustment" (5.75) and "Repair Paint
Systems For Matte Painted Vehicles" (5.76). |
Note
| The addition of Elastic Additive -ALZ 011 001- is omitted. |
| Stir or shake the Matting Component -LVM 769 810 A2- in the
can well. |
| With the two-part HS clear coat and two-part HS top coat,
mix the Matting Component -LVM 769 810 A2- according to
specification and infuse with hardener and thinner just before
processing. The processing of the ready-to spray mixture should
immediately follow. If the mixture remains in the mixing- or
spray gun receptacle for a longer period of time (15 minutes),
it should be stirred again before continuing to use
(separation). |
| Adding the matting compound can influence the covering
capacity. |
| It is absolutely necessary to test the respective mixture on
sheet metal to achieve the appropriate gloss level for the
vehicle. Gloss level measurements (60° angle) at adjacent parts
can also be helpful. |
| A touch-up/repair of the matted clear coat within the
surface (for example, side part or clever repair) is not
possible. |
| Dust inclusions cannot be polish out, so therefore ensure
that absolute cleanliness is maintained during the entire
painting process. |
| Apart from color-dependent differences, the actual gloss
level is influenced by different factors. In the following
comparison, various additional parameters and their effect on
the gloss levels are represented. |
|
|
|
| Higher Gloss Level |
Lower Gloss Level |
| shorter hardener |
longer hardener |
| shorter thinner |
longer thinner |
| higher processing
viscosity |
lower processing viscosity |
| higher dry layer
thickness |
lower dry layer thickness |
| shorter ventilation time |
longer ventilation time |
| forced drying |
Air drying |
| Influencing Factors on the Gloss Level: |
| Using different hardeners, thinners, application types,
drying conditions and layer thicknesses lead to different gloss
levels (up to 20%). |
|
|
|
| Final drying time with forced drying is a minimum of 15 to
20 minutes |
|
|
|
| Forced drying at +60 and 65 °C (140° and 149 °F) object
temperature for 45 minutes |
|
|
|
| Personal Protective Equipment: |
| Note the safety data sheets |
| Wear the personal protective equipment during application |
|
|
|
| Flashpoint: |
above +23 °C (73.4 °F) |
| VOC value: 2004/42/IIB(e)(840)600 |
The EU limit for this product
(product category IIB.e) in ready-to-use form is a maximum of 840 g/L
volatile organic compounds. The VOC-value of this product in
ready-to-use form is a maximum of 600 g/L. |
| The guaranteed shelf life of 48 months from date of
manufacture. Use no later than the date indicated on the label
and store in original container at +20 °C (68 °F). |
|
|
|
Definition:
Matting Component -ALN 775 106-
Edition 04/2013
Product Description
...
Definition:
Structuring Component, Fine -ALN 775 108-
Edition 04/2013
Product Description
...
Other materials:
Tyre Pressure Loss Indicator
Fig. 124 In the stowage compartment on
the front passenger side: button for the Tyre Pressure Loss Indicator
First read and observe the introductory information
and safety warnings The Tyre Pressure Loss Indicator uses data
from the ABS sensors and other functions to check the speed of rot ...
Cigarette lighter
Fig. 105 In the front centre console:
cigarette lighter
First read and observe the introductory information
and safety warnings
With the ignition switched on, press in the knob on the cigarette lighter
.
Wait for the lighter to pop out.
Pull out the cigarette lighter and li ...
Fastening and unfastening seat belts
Fig. 50 Inserting the seat belt latch
plate into the buckle
Fig. 51 Removing the latch plate from
the buckle
First read and observe the introductory information
and safety warnings
If worn properly, seat belts hold the vehicle occupants in the correct sitting
position during an accident ...
© 2016-2026 Copyright www.vwpolo.net
Matting Component -ALN 775 106
Structuring Component