Volkswagen Polo Owners Manual: Loading the load carrier system
First read and observe the introductory information
and safety warnings
Loads can be attached securely only when the mounts, roof bars and load carrier system are fitted correctly .
Maximum permissible roof load
The maximum permitted roof load is 75 kg. The roof load limit refers to the combined weight of the load carrier, the mounts or roof bars and the load carried on the roof .
Be sure you know the weight of the load carrier, the mounts or roof bars and the items you want to transport on the roof. Weigh them if necessary. Never carry a total of more than the maximum permissible roof load.
However, if you are using load carrier systems and mounts or roof bars with a lower weight rating, you will not be able to carry the maximum roof load. In this case, do not exceed the maximum weight limit for the load carrier system which is listed in the fitting instructions.
Distributing the load
Distribute the load evenly and secure it correctly .
Checking the fittings
After the mounts or roof bars and load carrier have been attached, check the bolted connections and fastenings once you have travelled a short distance and then at regular intervals.
WARNING
- Never exceed the quoted roof load, the maximum permissible axle loads, and the permissible gross vehicle weight for the vehicle.
- Do not exceed the maximum load of the mounts or roof bars and load carrier, even if the maximum roof load is not reached.
- Secure heavy objects as far forwards as possible and distribute the load evenly.
WARNING
- Always use suitable and undamaged securing straps.
- Secure loads properly.
Securing mounts, roof bars or load carrying system
Fig. 90 Securing points for mounts or
roof bars (both sides) A: for 2-door vehicles without roof railing. B: for 4-door
vehicles without roof railing. C: for vehicles with roof railing
First rea ...
Towing a trailer
...
Other materials:
Special Connector Systems
Note
If necessary, housing securing mechanisms (secondary locks)
must be released or removed using specified tool before
releasing the contacts. Refer to
→ Chapter „Secondary Lock“.
...
Using a child seat on the rear seats
First read and observe the introductory information
and safety warnings
When fitting a child seat to a rear seat, the position of the front seat must
be adjusted to ensure that the child has sufficient space. Adjust the front seat
according to the size of the child seat and child. Ensure that ...
Extraction System Group Classifications
At this time, A/C service units for extracting, cleaning and
filling refrigerant for motor vehicle A/C systems are available
from various manufacturers.
Group 3:
Mobile extraction and charging systems for filling
c ...
