Volkswagen Polo Owners Manual: Lights
- Introduction
- Indicator lamps
- Turn signal and main beam lever
- Switching lights on and off
- Lights and vision – functions
- Masking or switching over headlights for driving abroad (travel mode)
- Headlight range control, instrument and switch lighting
- Interior and reading lights
Introduction
This chapter contains information on the following subjects:
→ Indicator lamps
→ Turn signal and main beam lever
→ Switching lights on and off
→ Lights and visi ...
Other materials:
Wheel, Balancing with Fine Balancing Machine (Finish Balancer)
Before beginning balancing, the following requirements must
be fulfilled.
The tire pressure must be OK.
The tire profile must not be worn on one side. The tire
profile must be at least 4 mm.
...
Fender Corrosion Repair Measures, in Wheel Housing Liner Contact Area
Note
The corrosion protection in the fender seam must be applied on all
replacement parts, on which the attached seal is not already present.
The additional corrosion protection seal will prevent “chafe marks”
in the fender wheel housing liner.
...
Indicator lamps and fuel gauge
Fig. 129 In the instrument cluster: Variants
A and B: fuel gauges for petrol and diesel. Variant C: fuel gauge for autogas
First read and observe the introductory information
and safety warnings
Lit up
Needle position
Possible cause ...
