This chapter contains information on the following subjects:
→ Contents of the breakdown set
→ Preparation
→ Sealing and inflating tyres
→ Test after driving for 10 minutes
You can use the breakdown set (tyre mobility set) to safely seal any tyre damage caused by foreign bodies or punctures (up to 4 mm in diameter). Do not remove foreign objects (e.g. screws or nails) from the tyre!
Once the sealant has been added to the tyre, the tyre pressure must be checked again after approximately 10 minutes of driving.
Seek expert assistance if more than one vehicle tyre is damaged. The breakdown set is only designed for filling one tyre.
Only use the breakdown set if the car is parked in a safe place, you are familiar with the required actions and safety procedures, and you have access to the correct breakdown set. Seek expert assistance if this is not the case.
The tyre sealant must not be used:
Additional information and warnings:

WARNING

WARNING
Dispose of used or out-of-date sealant in accordance with legal requirements.
You can get a new tyre filler bottle from a Volkswagen dealership.
Observe the separate instructions from the manufacturer of the breakdown set.
Breakdown set
Contents of the breakdown setChanging gear using Tiptronic
Fig. 113 Selector lever in Tiptronic position
(left-hand drive) The controls are mirrored for right-hand drive vehicles
Fig. 114 Steering wheel with paddles for
Tiptronic
First read and observe the introductory information
and safety warnings Using Tiptronic, the gears can be shifted
u ...
Locking or unlocking the driver door manually
Fig. 155 Door handle on driver
door with lock cylinder
First read and observe the introductory
information and safety warnings
If locked manually, all doors are locked. If unlocked manually, only the
driver door is unlocked. Observe information on the anti-theft alarm .
Fold the key bi ...
Cigarette Lighter Socket, Removing and Installing
Special tools and workshop equipment
required
Cigarette Lighter Release Tool -T40148-
Note
The removal and installation for all sockets is performed in
the same way and is only described for the ciga ...