VW Polo manuals

Volkswagen Polo Owners Manual: Introduction

This chapter contains information on the following subjects:

 → Petrol  
 → Diesel  
 → Autogas  

Different engines require different fuels. The factory-fitted sticker on the inside of the tank flap indicates the fuel type that is required for your particular vehicle.

Volkswagen recommends using low-sulphur or sulphur-free fuels, to help reduce fuel consumption and prevent damage to the engine.

If the engine is not running smoothly or begins to judder, this can indicate poor or inadequate fuel quality, e.g. water in the fuel. If these symptoms appear, reduce the vehicle speed immediately and drive to the nearest qualified workshop at medium engine speeds, avoiding high engine loading. If these symptoms occur immediately after the vehicle has been refuelled, switch the engine off as soon as it is safe to do so and seek expert assistance. This can help to prevent further damage.

Additional information and warnings:

WARNING

Incorrect handling of fuel can cause explosions, fire and serious burns and injuries.

Fuel
...

Petrol
First read and observe the introductory information and safety warnings Petrol types Vehicles with a petrol engine must be run on unleaded petrol in compliance with the European standard EN 228 ...

Other materials:

Checklist
The following actions must always be carried out in the given order in preparation for filling a tyre : If you get a flat tyre, park your vehicle on a firm and level surface at a safe distance from the flow of traffic. Apply the handbrake firmly Braking, stopping and parking B ...

Introduction
This chapter contains information on the following subjects:  → Information stickers and plates  → Using the vehicle in other countries and continents  → Radio reception and aerials  → Volkswagen repair information  → Declaration of conformity  → ...

Evaporator Vent Temperature Sensor -G263- or Evaporator Temperature Sensor -G308
Function: The Evaporator Vent Temperature Sensor -G263- or Evaporator Temperature Sensor -G308- determines the temperature behind the evaporator. This value goes to the air conditioning control module and serves as a reference signal for ...

© 2016-2024 Copyright www.vwpolo.net