Volkswagen Polo Owners Manual: Introduction
			
			
			This chapter contains information on the following subjects:
 → Operating ParkPilot   
 → Acoustic and optical ParkPilot signals at the rear of the vehicle 
The ParkPilot assists the driver when manoeuvring and parking.
The ultrasound sensors in the rear bumper transmit and receive ultrasonic waves. 
The system uses the time difference between the ultrasonic waves (i.e. between the 
transmission and reflection from obstacles and the point of reception) to continuously 
calculate the distance between the bumper and the obstacle. 
Additional information and warnings:
	- Braking, stopping and parking   
 
	- Cleaning and caring for the vehicle exterior   
 
	- Accessories, modifications, repairs and renewal of parts  
	
 
	- Radio or navigation system ⇒ BookletRadio, or ⇒ BookletNavigation 
	system, 
 

WARNING
The ParkPilot is no substitute for full concentration on the part of the driver.
	- Unintentional vehicle movements can cause serious injury.
 
	- Always adapt your speed and driving style to suit visibility, weather, road 
	and traffic conditions.
 
	- Ultrasound sensors have blind spots in which obstacles and people cannot 
	be detected.
 
	- Always check the area around the vehicle as the ultrasound sensors will 
	not always detect infants, animals and objects.
 
	- Certain surfaces of objects and clothes cannot reflect the signals from 
	the ultrasound sensors. The system is unable to detect these objects or people 
	wearing this type of clothing, or they may be detected incorrectly.
 
	- External sources of sound can affect the signals of the ultrasound sensors. 
	This may prevent the system from recognising people or objects.
 

NOTICE
	- The ultrasound sensors may not always be able to detect objects such as 
	trailer drawbars, thin bars, fences, posts, trees and open or opening tailgates. 
	This can result in damage to your vehicle.
 
	- If the ParkPilot has detected an obstacle and issued a warning, the obstacle 
	may move out of the detection range of the ultrasound sensors as the vehicle 
	approaches it, particularly if the object is very high or very low. These objects 
	are no longer registered.
 
	- The vehicle can sustain considerable damage if the warning given by the 
	ParkPilot is ignored.
 
	- The ultrasound sensors in the bumper can be displaced or damaged through 
	impacts, e.g. when parking.
 
	- The ultrasound sensors in the bumper must be kept clean and free of ice 
	and snow, and must not be covered up by stickers or other objects, as this will 
	prevent the system from working properly.
 
	- The ultrasound sensors should only be sprayed briefly when 
	cleaning with pressure hoses and steam cleaners. A distance of more than 10 
	cm between the ultrasound sensors and the steam/hose nozzle must be observed.
 
	- Sources of noise can lead to errors in the ParkPilot system, e.g. rough 
	asphalt, cobblestones, induction loops, building equipment, or interference 
	from other vehicles.
 
	- Any equipment that has been retrofitted to the vehicle, e.g. bicycle carriers, 
	can prevent the ParkPilot from functioning properly.
 
Please contact a qualified workshop if there is a fault in the system. Volkswagen 
recommends using a Volkswagen dealership for this purpose. 
Volkswagen recommends that drivers practise using the ParkPilot in a traffic-calmed 
area or car park to allow them to familiarise themselves with the system and its 
functions. 
   Fig. 120 In the rear bumper: ParkPilot 
ultrasound sensors 
First read and observe the introductory information 
and safety warnings The ParkPilot uses ultraound sensors to 
determine the distan ...
   
 
   Other materials:
Rain/light sensor
   Fig. 75 Windscreen wiper lever: setting 
the rain/light sensor Ⓐ 
Fig. 76 Sensitive surface of the rain/light 
sensor 
First read and observe the introductory information 
and safety warnings
When the rain/light sensor is activated, it automatically controls the frequency 
of the wiper inte ...
   
Wax Spray -D 322 100 M2
   
	
		
		
			
				Definition:
			
		
		
			
				
				Wax Spray -D 322 100 M2-
			
		
		
			
				Edition 01/2011
			
		
		
			
				Product Description
			
		
		
			
				Wax Spray -D 322 100 M2- is a long-term anti-corrosion 
				agent. After drying, the product forms a light ...
   
Wire Break with Single Repair Point
   
	
		
		
			
				Repair point with single crimp connection
			
		
		
			
				–  
				Free up wire intended for repair (approximately 20 cm to 
				both sides of repair point).
			
		
		
			
				–  
				If required, remove wiring harness wrapping using a folding 
				 ...
   
 
	 
	
	
		
			© 2016-2025 Copyright www.vwpolo.net
