Fig. 26 Next to the driver seat: button for switching off the interior monitoring system and anti-tow alarm
The interior monitoring system will trigger an alarm if movement is detected inside the vehicle when the vehicle is locked.
The anti-tow alarm will be triggered if the vehicle is lifted.
Switching on the interior monitoring system and anti-tow alarm
Lock the vehicle using the vehicle key. When the anti-theft alarm is switched on, the interior monitoring system and the anti-tow alarm are also active.
Switching off the interior monitoring system and anti-tow alarm
The orientation lighting in the button must be lit up when switching the systems off. To switch the orientation lighting on, remove the key from the ignition or open one of the doors.
The interior monitoring system and anti-tow alarm should therefore be switched off before the vehicle is locked in any of the following, or similar, situations:
Risk of false alarm
Interior monitoring can only work properly if the vehicle is completely closed. Comply with legal regulations. A false alarm can be triggered in any of the following circumstances:
If doors or the tailgate are still open when the anti-theft alarm is activated, only the anti-theft alarm is activated. Interior monitoring and the anti-tow alarm are not activated until all doors and the tailgate are closed.
Refrigerant Oil
Refrigerant oil mixes with the refrigerant (about 20 - 40%,
depending on compressor type and amount of refrigerant) and
circulates constantly in the system, lubricating the moving
parts.
Special synthetic refrigerant oils, for example,
...
Indicator lamp
First read and observe the introductory information
and safety warnings
The central locking system indicator lamp is located in the driver door .
Depending on the vehicle equipment level, the vehicle may have an anti-theft
alarm and a SAFELOCK mechanism .
After locking ...
Infrared Dryer -VAS6874
Definition:
Infrared Dryer -VAS6874-
Product Description:
The infrared dryer is used to dry paste, filler, base paint,
top coats and clear coats on vertical surfaces using two clock
timers fo ...