Volkswagen Polo Owners Manual: Information on changing bulbs
First read and observe the introductory
information and safety warnings
Indicator lamp
First read and observe the introductory
information and safety warnings
Lit up
Possible cause
Solution
There is a defective bulb in ...
Checklist
Always carry out the following actions for changing a bulb in the
given order :
Park the vehicle on a firm and level
surface at a safe distance from the flow of traffic.
Apply the hand ...
Other materials:
Information on the brakes
First read and observe the introductory information
and safety warnings New brake pads cannot generate
the full braking effect during the first 200 to 300 km and must first be run in
. However, you can compensate for the slightly reduced braking force
by applying more pressure to the bra ...
Waxing and polishing the vehicle
First read and observe the introductory information
and safety warningsWaxing
Waxing protects the paintwork. You will need to re-wax the vehicle with a good
hard wax if water no longer clearly forms small drops
and runs off the paintwork when it is clean.
Even if a wax solution is used regul ...
CAN Bus Wires, Repairing
Unshielded two-strand wiring -1-
and -2- with a cross section of
0.35 mm2 or 0.5 mm2
can be used as CAN bus wiring.
The color coding of CAN bus wires can be found in the
following table:
...
